It’s not easy to find the correct PTAC. There are numerous considerations to be made. When you’re looking at actual PTAC units for sale, there are a lot of small aspects to keep in mind to ensure you buy the proper one.

When looking for PTAC units for sale, keep the following in mind:

  • Price

For energy-efficient and cost-effective climate control, PTAC units are the ideal alternative. They can help you save up to 20% on your annual utility expenditures by combining heating and cooling.

That doesn’t mean they’re all the same price. They come in a wide range of costs, as you might expect. Your budget is entirely up to you, but it is worthwhile. You’ll be able to limit your alternatives significantly once you know how much money you have to play with.


  • Dimensions

If you’re replacing an existing PTAC unit, make sure you have the exact measurements so you can check any PTAC units for sale to see if they’ll fit in the same spot.

If you’re installing a new PTAC that hasn’t been used before, you’ll have a little more leeway in selecting a size. However, you should still measure the area where the replacement unit will be installed. You’ll want to make sure you get one that will fit. The majority of PTACs are positioned near the floor, commonly under windows. Make certain you don’t end up with a unit that is too big for the space.


  • Btu = British Thermal Unit (Power)

The output of your optimal PTAC unit is determined by the size of the space it will cool.

One of the first questions you’ll have is how much Btu (British Thermal Units) the area will require. You can use a Btu calculator to make this process easier.

  1.  If you buy a low-Btu unit, it will use more energy than is necessary, overworking the device and decreasing its lifespan.
  2. If you buy a unit with a Btu rating that is too high, it can generate uncomfortable humidity and interfere with the device’s overall operation.

 As a result, make sure you obtain the proper size. It’s worthwhile to calculate.


  • Heat Source

When looking for PTACs for sale, keep in mind that they all cool and heat using one of two methods: heat pumps or electric heat.



  1. PTAC units with heat pumps are usually more expensive up front, costing roughly $60 or $70 extra.
  2. Because they’re so much more energy-efficient, you may expect to save money on your power bills for the duration of the unit’s life, eventually recouping the extra cost.
  3. When it comes to heating a room, heat pumps are less powerful than electric heat PTACs.

So, if you’re mostly planning to use your PTAC for cooling and you only have mild winters, a heat pump model should suffice.


Heat generated by electricity


  1. Up front, PTAC units with electric heat are less expensive.
  2. However, they consume more energy, and you’ll wind up spending more money in the long run.
  3. As heaters, they’re a lot more powerful. Electric heat can withstand severe cold and even serve as a primary warmer in a room.


So, if you plan to conduct a lot of heating with your PTAC (especially in a climate with cold winters), a PTAC Unit NYC model with electric heat is certainly worth it.

  • Electrical Requirements & Plug Type

When looking for PTAC units for sale, it’s important to know what type of plug each one requires. You should double-check that the plug type matches the outlet you’ll be using.


When it comes to the amperage of a PTAC, there are three alternatives. The heating capacity of the unit is the sole determinant of all three. The amperage is unaffected by the cooling Btu.

  • 15 amp for 2.5 kW of heat
  • 20 amp 3.5 kW heat
  • 30 amp for 5.0 kW of heat

Before ordering any equipment, make sure the breaker sizes are correct. The installed outlets on many properties do not match the breakers, and breaker amperage is the most crucial element for PTAC function.

If you’re replacing an existing air conditioner, look at the data plate on the chassis to see how much power it draws, and make sure the plug matches the one that’s already installed.

  • Energy Consumption (EER)

The energy efficiency ratio (EER) is a system for calculating a unit’s efficiency. The higher the energy efficiency rating, the more energy efficient the unit is.

The ratings are consistent across models, however they cannot be swapped because each rating has its own testing technique.

  • Noise Levels

A one-fan or two-fan system is available with PTAC units. A fan is located on the condenser side and another is located on the evaporator side in a two-fan arrangement. They’re usually more subdued.

In fact, a PTAC unit with a two-fan system is frequently the only way to ensure a quieter system. Aside from that, most big brands have similar noise levels.

While different PTAC companies use data to calculate their noise levels, the testing standards used by each vary, leaving nothing in the way of consistency.


Is it critical that your PTAC device be very quiet? If you answered yes, you should look for PTAC units for sale that include a two-fan system.

  • Longevity

If you’re going to buy a PTAC, be sure it’s constructed to last. Make sure you’re looking for PTAC units that claim to have a long lifespan (and can truly deliver).

Take a look at the consumer feedback. Reviewers are likely to warn potential shoppers away from a model that is renowned for breaking down early or frequently.

Remember that PTAC units that need to be serviced frequently will result in a lot of extra costs and days where you won’t be able to condition a room.

Choose a brand—and a model—that has a reputation for lasting without requiring a lot of upkeep. Then be certain that the reputation you’ve earned is well-deserved.


  • Maintenance Ease

This one is related to the last one, although it’s a little different.

No matter how robust a PTAC unit is, it will almost certainly require maintenance at some point. Keep an eye out for PTAC units that are designed for easy maintenance when you’re looking through the infinite lists of PTAC units for sale.

Many manufacturers, for example, provide units with easy access to the condenser coils for fast cleaning.


  • Manufacturer’s Warranty 

If you’re genuinely considering buying a PTAC machine, look into the warranties available.

A strong guarantee indicates that the manufacturer is confident in their product and expects it to last for a long time. And if you run into any problems down the line, it’s nice to know you have a way to fix things without having to start all over again.

Are you ready to purchase A PTAC Unit?

Hopefully, you now have a clearer picture of what you’re looking for than you had previously. Now is the moment to figure out exactly what you require, take some measurements, and begin looking for PTAC units for sale within your budget.


We’ve got our fingers crossed for you. Give us a call at (929) 447-2077 if you’d like some expert guidance on How Much PTAC Units Cost for your property.

About admin

No Comments

Be the first to start a conversation

Leave a Reply

  • (will not be published)